SALT PROCESSING EQUIPMENT
Fluid Bed Salt Dryer
Engineered air channels and motors distribute the drying air so that salt crystals dry evenly.
Discuss this equipment
PROSALT · Salt Drying Plant
How it works
Engineered air channels and motors distribute the drying air so that salt crystals dry evenly. The system is configured for the required moisture removal and product quality.
Its place in the process
The fluid bed is the central drying stage, receiving mechanically dewatered salt and distributing process air through the product. The heater, fans, cooling section and fines recovery circuit form one coordinated drying system.
Explore the complete plant ↗Engineering inputs
Specify the right configuration
Equipment selection starts with your material, the required product and the available site conditions. Share the operating range and layout with PROSALT so the interfaces, dimensions and final specification can be defined for your project.
Salt throughput, inlet moisture and required final moisture
Particle distribution and target discharge temperature
Available heat, air conditions and fines recovery needs
Final materials, dimensions, drive power and operating targets are defined in the project specification. Product images illustrate the equipment family.
Technical reference
Equipment for a 50 t/h plant
These dimensions and specifications refer to equipment used in a 50 t/h plant. Every PROSALT plant is custom engineered; dimensions, materials, motor power and quantities may vary with the project. Request the current catalogue for up-to-date technical specifications.
| Parameter | Reference specification |
|---|---|
| Reference plant capacity | 50 t/h |
| Overall dimensions | L9700 × W2200 × H4630 mm |
| Screen area dimensions | 1400 × 8000 mm |
| Vibration motor power | 3.6 kW + 3.6 kW twin vibrators |
| Dryer upper body plate | 3 mm AISI 304 stainless steel |
| Dryer lower body plate | 10 mm ST-37 steel plate |
| Dryer screen plate | AISI 316 stainless steel (0.30 µm aperture) |
| Quantity in the reference plant | 2 pcs |
Equipment questions
What information is needed to size a fluid bed salt dryer?
Provide the feed rate, moisture range, grain distribution and finished-product target. Utility conditions and annual operating hours allow the drying system to be assessed as a complete process.
Can this equipment be integrated into an existing salt plant?
A retrofit is assessed from the existing process flow, material analysis, available dimensions and utility connections. The upstream and downstream equipment must be reviewed together before the scope is agreed.
YOUR NEXT CHAPTER
A better process starts with a conversation.
A new facility or a single piece of equipment. Tell us what you have in mind.
Talk to our team